How to Start Wireless Projects Using OMNeT++

To start a Wireless Network project in OMNeT++ has require to replicating the interaction in a wireless environment among the nodes. OMNeT++ environment and INET frameworks offer some tools for designing the wireless protocols, mobility, and signal propagation. Below is a thorough procedure to get started:

Steps to Start Wireless Projects in OMNeT++

  1. Install OMNeT++
  • Download: Go to the official OMNeT++ page to download it on the system.
  • Install: Based on the OS, we adhere to the guidelines for installation.
  • Verify: Make sure that OMNeT++ IDE properly installed without any issues.
  1. Install Required Frameworks

For wireless network projects, we will need some frameworks which prolong the OMNeT++ environment along with wireless communication aspects.

Recommended Frameworks:

  1. INET Framework:
    • This framework provides wireless protocols, mobility models, and signal propagation.
    • Get INET’s official page to download it.
  2. Castalia Framework (optional):
    • It is particularly designed for wireless sensor networks.
    • This framework is optimal for IoT and power-constrained networks.
  3. SimuLTE Framework (optional):
    • It is intended for LTE and 5G-based wireless interaction.

Installation Steps:

  1. Initially, we should download the framework like INET.
  2. In OMNeT++ workspace, we can obtain them.
  3. Utilise File > Import > Existing Projects to import the framework in the OMNeT++ IDE.
  4. Form the framework within OMNeT++ environment.
  1. Define Your Wireless Network Scenario

Describe wireless network project’s objectives:

  • Basic Communication: Replicate the packet exchange among wireless nodes for communication.
  • Ad Hoc Networks: These networks design the dynamic, infrastructure-less networks.
  • Wireless Sensor Networks: To mimic energy-efficient interaction in wireless sensor networks.
  • IoT: It able to model the networks for connected devices.
  • Advanced Wireless Networks: Discover LTE, 5G, or hybrid networks for modern wireless networks.
  1. Define Network Topology

Describe the network topology with wireless nodes, access points, and mobility to utilize a .ned file.

Example .ned File:

Basic Wireless Network:

network WirelessNetwork

{

submodules:

accessPoint: AccessPoint;     // Access Point

mobileNode[0..4]: MobileNode; // Array of 5 mobile nodes

connections allowunconnected:

mobileNode[*].wlan <–> accessPoint.wlan; // Wireless links

}

Wireless Ad Hoc Network:

network AdHocNetwork

{

submodules:

node[0..9]: WirelessNode; // 10 wireless nodes

connections:

// Connections are dynamic based on proximity

node[*].wlan <–> node[*].wlan;

}

  1. Implement Communication Logic
  • Applications:
    • For data communication, we can utilize the built-in applications of INET such as UdpBasicApp, TcpApp
  • Routing Protocols:
    • We need to utilize the routing protocols like AODV, DSR, or other built-in ad hoc routing protocols.
  • Custom Protocols:
    • Enhance and experiment the wireless communication protocols which is customize.

Example C++ Code for Basic Packet Exchange:

void WirelessNode::sendPacket()

{

Packet *pkt = new Packet(“WirelessPacket”);

send(pkt, “wlan$o”);

}

void WirelessNode::handlePacket(Packet *pkt)

{

EV << “Received packet: ” << pkt->getName() << endl;

delete pkt;

}

  1. Configure Mobility

Wireless networks frequently contain the mobile nodes. Make use of INET’s mobility models to configure them.

Example Mobility Configuration:

[General]

*.mobileNode[*].mobilityType = “RandomWaypointMobility”

*.mobileNode[*].mobility.speed = uniform(1, 5)   # Speed between 1 and 5 m/s

*.mobileNode[*].mobility.bounds = “0,0,1000,1000”  # Simulation area

  1. Configure Wireless Parameters

In the omnetpp.ini file, we describe the interaction metrics like transmission power, channel frequencies, and data rates.

Example Configuration:

network = WirelessNetwork

sim-time-limit = 100s

*.accessPoint.wlan[*].radio.transmitter.power = 20mW

*.mobileNode[*].wlan[*].radio.transmitter.power = 10mW

*.mobileNode[*].app[0].typename = “UdpBasicApp”

*.mobileNode[*].app[0].destAddress = “accessPoint”

*.mobileNode[*].app[0].messageLength = 512  # Packet size in bytes

*.mobileNode[*].app[0].sendInterval = uniform(0.1s, 0.5s)  # Random intervals

  1. Run the Simulation
  • Run the Simulation:
    • We execute the simulation by right-clicking on the .ini file and choosing Run As > OMNeT++ Simulation.
  • Visualization:
    • Monitor the node movement, packet transmissions, and network dynamics within the simulation GUI for visualization.
  1. Analyze Results
  • Metrics to Measure:
    • Packet delivery ratio.
    • Signal-to-Noise Ratio (SNR).
    • Latency and jitter.
    • Energy consumption (if applicable).
  • Tools for Analysis:
    • Examine .sca and .vec files to utilize built-in tools of OMNeT++ for analysis.
    • Transfer outcomes to external tools like Python, MATLAB, or Excel for further analysis.
  1. Enhance the Project
  • Scalability:
    • Maximize the volume of nodes and then monitor the performance of network.
  • Energy Efficiency:
    • For energy efficiency, mimic battery-operated devices and power-saving protocols.
  • QoS Optimization:
    • Enhance the QoS metrics such as latency, bandwidth, or reliability for certain applications.
  • Security:
    • Insert the encryption, authentication, or replicate attacks such as jamming or eavesdropping for network security.
  • Hybrid Networks:
    • For multi-technology networks, we can combine Wi-Fi, LTE, and 5G.

Example Wireless Network Use Cases

  1. Wi-Fi Network Simulation:
    • We need to examine the coverage and performance of Wi-Fi network within a dense network.
  2. Ad Hoc Networks:
    • Experiment the routing protocols within dynamic and infrastructure-less networks.
  3. IoT Applications:
    • To mimic lightweight protocols such as MQTT or CoAP for IoT applications.
  4. Vehicular Ad Hoc Networks (VANETs):
    • Integrate with SUMO framework to replicate the traffic-aware communication.
  5. 5G Wireless:
    • We can design the ultra-reliable low-latency communication (URLLC) to utilzie SimuLTE.

Above illustrated approach to Wireless projects is provided in an order manner that helps you to simulate and examine it using OMNeT++ environment and we can provide further elaboration upon request.

phdprojects.org specializes in INET frameworks, providing expert guidance for your projects . If you seek the highest quality support, allow us to manage your work. We develop Wireless Projects utilizing the OMNeT++ tool, tailored to your specific needs. Contact us via email, and we will be happy to assist you.